Garmin InReach Spine Mount 3D Printer Model
The file 'Garmin InReach Spine Mount 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Garmin InReach Spine Mount 3D Printer Model' is (stl) file type, size is 1.4MB.
Keep your Garmin InReach Explorer+ or SE+ safe, secure and accessible at all times. Designed to easily mount and remove one-handed, yet stay securely in place with an integrated snap-fit latch. Three mounting options offer a wide array of mounting applications.
Mounting Options:
Hardware Required:
-M3x6 (x2)
-M3 Nut (x2)
Sew-In Mount:
-Press M3 Nut into each recess of sew-in-mount-1.stl
-With (2x) M3 Nut installed, place sew-in-mount-1.stl in final position with M3 Nut facing the mounting material/fabric.
-From the opposite side of the mounting material/fabric, align sew-in-mount-2.stl with sew-in-mount-1.stl and thread in place using any of the 35 button holes.
-Once the Sew-In mount is secured, mount the InReach Spine Mount using (x2) M3x6 from the front as seen in object images.
| 1in_Ball_Mount_M3.stl | 1.6MB | |
| Clip_On_Mount.stl | 427.9KB | |
| InReach_Spine_Mount_v2.stl | 2.1MB | |
| Sew-In_Mount_1.stl | 537.3KB | |
| Sew-In_Mount_2.stl | 361.2KB |
