Garmin Edge 500, 510, 800 ,810 Mount With 3 Versions To Choose From 3D Printer Model
The file 'Garmin Edge 500, 510, 800 ,810 Mount With 3 Versions To Choose From 3D Printer Model' is (stl) file type, size is 992.5KB.
The file 'Garmin Edge 500, 510, 800 ,810 Mount With 3 Versions To Choose From 3D Printer Model' is (stl) file type, size is 992.5KB.
Handlebar mount for your Garmen edge 500/510, 800/810 using a 1/4 turn to lock it in place. There are three versions, one with a solid arm, one with a spider arm, and for those that have strenght issues with prints one that utilises the original Garmin bar mount that comes with the unit. The Garmin mount sits inside the 3D printed one and is held in place by a bottom cap. Also included is an adapter for thinner handlbars. Remeber you will need to print 2 of these.
All you need is an M5 nut and bolt to finish it off and a 3mm diameter metal pin for the clamp pivot.
Thumb screw means you can easily adjust the poistion of the mount or remove for mounting to another bike without needing tools.
| 31.8-22.3_adapter.stl | 501.7KB | |
| garmin_outfront_lower_mount.stl | 379.0KB | |
| garmin_outfront_lower_mount_rev_2.stl | 547.5KB | |
| garmin_outfront_lower_mount_rev_3.stl | 630.3KB | |
| garmin_outfront_lower_mount__rev_3_cap.stl | 68.8KB | |
| garmin_outfront_upper_mount.stl | 380.6KB | |
| thumb_screw.stl | 398.2KB |
