Gardening Hose 5L Water Bottle Air Pushed 3D Printer Model
The file 'Gardening Hose 5L Water Bottle Air Pushed 3D Printer Model' is (stl) file type, size is 1.8MB.
The file 'Gardening Hose 5L Water Bottle Air Pushed 3D Printer Model' is (stl) file type, size is 1.8MB.
I designed this stuff to push water out of a 5L bottle by injecting air.
Both air and water are injected and ejected through gardening hoses.
I used a rubber hose to flow water from the bottom of the bottle to the exit. I fixed this hose to the little nozzle inside the cap using a zip tie.
Finally I used teflon tape on the outter screw to make it watertight.
| Bouchon_part.stl | 1.9MB | |
| Geo_part.stl | 2.5MB |
