Garden Watering 3D Printer Model
The file 'Garden Watering 3D Printer Model' is (stl) file type, size is 2.8MB.
The file 'Garden Watering 3D Printer Model' is (stl) file type, size is 2.8MB.
Materials : Auto Off timer & photo relay, water pump, wago clip, dupont cable, 9-12V supply.
With this application you can Watering you garden once or Twice a day during few second or lots of minutes
i use a photo relay instead of daily timer because it's easy to work with. Especially when you reinstalled the system from one year to the next. ( nothing is needed ! ...)
Be sure not to run out of water :-) !
Ideal solution for your holidays
All design feat 8mm & 9mm inside diameter pipe ( min 8.75 - max 9.95 ) you can heat a little the pipe for easy installation.
You should have about
| allConnector.stl | 12.6MB | |
| electroniqueHouseBottom.stl | 223.1KB | |
| electroniqueHouseTop.stl | 316.2KB | |
| endCarottConnector_1Hole.stl | 447.5KB | |
| endConnector_1Hole.stl | 393.0KB | |
| endConnector_2Holes.stl | 409.1KB | |
| endConnector_3Holes.stl | 411.3KB | |
| endConnector_4Holes.stl | 424.5KB | |
| endConnector_5Holes.stl | 437.1KB | |
| throughConnector_1Hole.stl | 789.8KB | |
| throughConnector_2Holes.stl | 801.5KB | |
| throughConnector_3Holes.stl | 807.9KB | |
| throughConnector_9Holes_100mm.stl | 874.7KB | |
| through_3Connector_3Holes_30mm.stl | 1.2MB | |
| through_3Connector_5Holes_40mm.stl | 1.2MB | |
| through_3Connector_7Holes_100mm.stl | 1.2MB | |
| through_4Connector_2Holes_45mm.stl | 1.5MB | |
| through_4Connector_3Holes_45mm.stl | 1.5MB | |
| through_5Connector_3Holes_60mm.stl | 1.9MB |
