Garden Solar Light Housing 3D Printer Model
The file 'Garden Solar Light Housing 3D Printer Model' is (stl) file type, size is 9.4MB.
The file 'Garden Solar Light Housing 3D Printer Model' is (stl) file type, size is 9.4MB.
3 different housings for Garden solar lights, No supports or infill, little PLA used and prints pretty fast.
What to do with a garden solar light.. This one was purchased at Dollar tree after sliding off metal cover, it measured 55.5mm diameter. You can insert in smaller ones. I've designed it to use no supports or no infill. It is recommended you use clear PLA or natural. It can be put indoors or out. I designed a hollow center section in the shape of a step funnel to disperse the light better and to allow water to drain through. The base was designed for the dollar tree light base (stake) as well, so it won't blow away..
All three designs are an improvement on how the light is dispersed, Compared to the stock housing it comes in. The new design appears brighter because of this light dispersion.
Enjoy
Sherm
| dt-lightholder-03.stl | 87.0KB | |
| dt-lightholder-a03.stl | 2.8MB | |
| dt-lightholder-c01.stl | 20.2MB |
