Simple hand shovel for gardening or re-potting house plants. It has worked great for me so far. I recommend printing both pieces vertically, spade section standing up will be just under 210mm in height. See photo of spade section in slic3r.
*** I reccommend printing the spade section with 7+ perimeters to ensure strength in the blade and base with 100% infill.
***The handle should have atleast 6+ perimeters for strength. Infill for the handle isn't critical, I did 15%.
Object has been printed at 100% and 50% successfully.
| garden_shovel.stl | 363.0KB | |
| shovel_handle.stl | 78.8KB |
