Garden Irrigation Spray System / Garten Bewässerung System 3D Printer Model Free Download

Description Files (28)

Summary

here you will find a garden irrigation system like the manufacturer gardena has. Free under the motto "Why buy, when you can print it" ;-) I have designed it modularly and as GlueEdition so that you can connect different ground holders, middle parts with 1-3 direct connections / gardena coupling or different spray heads. the spray heads are still in development. However, angles of 45°, 180°, 270° and 360° are still available. I was amazed how far the spray head sprays with 2.5 - 3 bar water pressure, so a dosage with a screw in the head is available.

Preview:

Support material:

The support material for the spray head is already included in the stl files ( please print the head upside down ). The fine tubes at the place where the o-ring goes in and at the spray exit is can be easily cut out with a cutter knife.
For the middle section only support material is required from the base plate.

You need:

Printed parts ;-)
Screws 3,5 x12 or 3,5x15
O-ring inner diameter Ø 12 x 3,5 mm NBR 70 ( https://www.ebay.de/itm/401009056492 )
M4x 25mm dosage screw

Please note that the development is still in progress. So stay tuned!!!!

ALSO INTERESTING

Update 18.05.20

Now there is a middle section "T" with 3 feed lines offset at 90° to each other as a glued edition. With this you can also place a sprinkler on a side of a bed and u can connect a 90° supply line.
Added:
middle_section_3con180_v1_GLUE.stl
middle_section_3con180_v1.stl

Update 25.04.20

Now there is a middle section with 2 feed lines offset at 90° to each other as a glued edition. With this you can also place a sprinkler in a corner of a bed and you will not have any problems with the supply lines.
Added:
middle_section_2con90_v1_GLUE.stl

Update 31.08.18

From now on there is a spray head with two 90° opposite exits as some people want. This means that even things opposite each other can be cast.
Added:
sprayhead_v2_9090dg.stl
sprayhead_v2_9090dgNOdosage.stl

Update 30.08.18

A GlueEdition is now available. With this, the connections can now be glued to the centre section using acetone. This has two advantages. Anyone can fit any center section with a connector and there is no need to print overhangs. ( No more support needed for the middle section)
I have attached some more pictures of the GlueEdition, which I have already tested. Works out great in my opinion.
Added:
middle_section_1con_GlueEdition_v1.stl
middle_section_2con_GlueEdition_v1.stl
middle_section_3con_GlueEdition_v1.stl
middle_section_GE_Connector_Gardena_v1.stl
middle_section_GE_Connector_Hoseclip_v1.stl
sprayhead_v1_BlindPlug.stl

Update 11.07.18

There is now 2 versions of the middle section with clamp connection and Gardena connection, which can be plugged onto a 12mm rod. This means that also higher plants can be sprayed.
Added:
middle_section_StaffHolder_Hoseclip_v1.stl
middle_section_StaffHolder_Gardena_v1.stl

Update 03.07.18

I have added some gardena coupling versions to the middle sections.
Added:
middle_section_1con_1gardena_v1.stl
middle_section_2gardena_v1.stl
middle_section_1gardena_v1.stl

Update 26.06.18

I have attached some more pictures of the working system.
I make the ground holder still a little stronger and with cross struts.
Now the spray head is available with and without dosing screw.
Added:
ground_holder_v2.stl
sprayhead_v2_90dgNOdosage.stl
sprayhead_v2_180dgNOdosage.stl
sprayhead_v2_270dgNOdosage.stl
sprayhead_v2_360dgNOdosage.stl

Update 15.06.18

I have added 90°, 180°, 270°, 360° versions and a dosage option with a screw in all spray heads.
Added:
sprayhead_v2_90dg.stl
sprayhead_v2_180dg.stl
sprayhead_v2_270dg.stl
sprayhead_v2_360dg.stl

Happy printing

MFG

Chris

Follow me on...
prusaprinters.org
thingiverse
Instagram

If you like it ;) - Thx for me!
www.paypal.me/schiffersoft

ground_holder_v2.stl	81.5KB
middle_section_1con_1gardena_v1.stl	1.4MB
middle_section_1con_GlueEdition_v1.stl	1.2MB
middle_section_1con_v1.stl	1.1MB
middle_section_1gardena_v1.stl	1.6MB
middle_section_2con90_v1_GLUE.stl	1.2MB
middle_section_2con_GlueEdition_v1.stl	1.3MB
middle_section_2con_v1.stl	887.7KB
middle_section_2gardena_v1.stl	1.8MB
middle_section_3con180_v1.stl	882.4KB
middle_section_3con180_v1_GLUE.stl	1.2MB
middle_section_3con_GlueEdition_v1.stl	938.9KB
middle_section_3con_v1.stl	867.5KB
middle_section_GE_Connector_Gardena_v1.stl	1.3MB
middle_section_GE_Connector_Hoseclip_v1.stl	133.8KB
middle_section_StaffHolder_Gardena_v1.stl	1.3MB
middle_section_StaffHolder_Hoseclip_v1.stl	822.2KB
sprayhead_v1_BlindPlug.stl	1.1MB
sprayhead_v2_180dg.stl	2.2MB
sprayhead_v2_180dgNOdosage.stl	2.2MB
sprayhead_v2_270dg.stl	2.4MB
sprayhead_v2_270dgNOdosage.stl	2.4MB
sprayhead_v2_360dg.stl	3.0MB
sprayhead_v2_360dgNOdosage.stl	3.0MB
sprayhead_v2_9090dg.stl	2.4MB
sprayhead_v2_9090dgNOdosage.stl	2.3MB
sprayhead_v2_90dg.stl	1.8MB
sprayhead_v2_90dgNOdosage.stl	1.8MB

Garden Irrigation Spray System / Garten Bewässerung System 3D Printer Model

Summary

You might also like