Make a strong spinning pivot for your garden which can be screwed directly into wood for a solid mount that will last a long time. This spool is sized for a 1/2 inch diameter lag screw, but you can reduce or enlarge to fit the fasteners you have on hand.
I printed the spools out of carbon fiber reinforced PETG so that they would take a lot of abuse and sunlight.
There are three surfaces that contact the fastener. This is done to minimize friction and spin freely.
UPDATE May 2023: Spool redesign to reduce chipping on top, lower spinning friction at base, and easier printing. Rev 5 should be printed upside down.
UPDATE Dec 2018: I added a thicker version so the top would not be as fragile.
| Hose_Spinner_v5.stl | 1.9MB |
