GAMO AF 10 STANAG Rails Holder 3D Printer Model
The file 'GAMO AF 10 STANAG Rails Holder 3D Printer Model' is (STL) file type, size is 3.2MB.
The file 'GAMO AF 10 STANAG Rails Holder 3D Printer Model' is (STL) file type, size is 3.2MB.
Hey,
Rail holder for my Air gun GAMO AF 10, my old lady, more than 30 years.
I printed and tested it, the only things that at the moment still pending to test is the botton Stanag rail, i found some measures on web , it should be compatible also with picatinny rings. But i don't have the rings :)
Concidering to assembly it with a M4x20 mm screw, more long of the original one, for the rail i made some cut to add no: 6 M3 bolts.
As you note on front where there are the big holes, i added two bevels to help to pass the 5 mm big pin with seiger positioned in front of the gun, The bevels are not sufficient to slide quick the part, but for my choice i would like to keep the rail very precise, i heat a little bit the rail in order to deform and assembly the part on gun.
The project is under construction, since i would like to create the special rails and special rings in order to add laser or light, please print and test, and if you like it, i really appreciate a beer !
Jonweb
| AF_10_NATO_Rail_STANAG_4694_Gun_holder.STL | 10.4MB |
