Gammy's remix of elinanz's Easter egg chick-bunny Easter decoration.
This version print-friendly.
Improvements:
- The model has been split into three individual parts for easy printing
- The nose geometry has been modified to make the model manifold
(properly connected to and a part of the body) - The underside of the feet have been flattened
- The legs have been thickened, and an insert portion has been added, to slot
into the bottom portion of the model - The bottom portion now has two holes to insert the feet into
Notes:
- The bottom part holes, where the feet are to be inserted, have been
constraint-adjusted to fit. There should be no need to scale them further. - Blender and STL files are included, as well as elinanz' original stl.
- I used Tamiya Cement to attach the bottom and top portions. I needed no
adhesive or solvent to attach the legs; they're firm-fit - I suggest painting this model, especially to hide the top/bottom seam
- Successfully printed using
- Part 1 (Legs)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.15mm layer height
- 10% infill
- No supports
- Part 2 (Bottom)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.2mm layer height
- 10% infill
- Supports touching buildplate (for the tail)
- Part 3 (Top)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.2mm layer height
- 10% infill
- Supports everywhere (for the right ear)
