The file 'Gamma 2.0 – Printed In Place RC Car 3D Printer Model' is (stl,gcode,txt) file type, size is 19.6MB.
I am no longer updating my files on Thingiverse.
You can download the latest and greatest version of this file here:
https://cults3d.com/en/3d-model/gadget/gamma-2-demo
1:28 scale printed-in-place rc car chassis and body.
98mm wheelbase
The frame, rear axle, steering system and wheels are printed together without any supports from the slicer (there's built in supports in the model).
For more information, please see the video:
https://youtu.be/Xs84rpXeK7o
This is an updated version of the Gamma 1.8, found here:
(https://cults3d.com/en/3d-model/game/the-gamma-printed-in-place-rc-car-version-1-8)
This model was conceived on a stock Ender 3 Pro, and prints successfully on other printers such as Tronxy X1, Folgertech 2020 I3, Ender 5 Plus, Makerbot 2X, and Elegoo Neptune 2.
**Please follow the settings instructions carefully before printing.
You will need:
-3.7 gram servo
-1 or 2 cell lipo battery (and charger)
-130 size electric motor
-receiver/remote
-20-30amp speed control
-5 m2 screws (4 for the body mounts, and 1 for the servo arm)
-0.5 modulus 8 tooth pinion
*if you are printing the "Easy-Mode" chassis, which has looser tolerances, you will need a 9 tooth pinion instead.
-rubber or sponge tires - inner diameter 18mm
*I included some tires you can print in TPU. Use Ninjaflex for best results.
You can find pictures and information of this and similar projects here:
my instagram:
https://www.instagram.com/underengineered_1077/
my youtube channel:
https://www.youtube.com/channel/UCUt46baUhf-O4a2VVOzDRmw
the OpenZ : Open Source 1:28 RC facebook group (you will find awesome projects from other people there as well):
https://www.facebook.com/groups/209094766350376
| AlfaLorean_98mm.stl | 392.6KB | |
| ender3pro_petgAlfaLor.gcode | 5.4MB | |
| ender3pro_petgBoring.gcode | 6.2MB | |
| ender3pro_petgG2.gcode | 10.4MB | |
| ender3pro_petgG2EZmode.gcode | 10.4MB | |
| ender3pro_plaAlfaLor.gcode | 10.3MB | |
| ender3pro_plaBoring.gcode | 9.5MB | |
| ender3pro_plaG2.gcode | 8.6MB | |
| ender3pro_plaG2EZmode.gcode | 8.7MB | |
| front_mount.stl | 30.7KB | |
| Gamma2.stl | 1.1MB | |
| Gamma2_Easymode.stl | 1.1MB | |
| Offroad_-_Front.stl | 2.1MB | |
| Offroad_-_Rear.stl | 2.1MB | |
| rear_mount_1.stl | 45.7KB | |
| rear_mount_2.stl | 46.0KB | |
| servo_arm.stl | 135.4KB | |
| SETTINGS.txt | 1.1KB | |
| Slicks_-_Front.stl | 241.9KB | |
| Slicks_-_Rear.stl | 307.4KB | |
| TheBoring_98mm.stl | 294.6KB | |
| Treads_-_Front.stl | 772.3KB | |
| Treads_-_Rear.stl | 1.0MB |
