GAMER HEADSET HOOK HOLDER FOR DESK STAND:

✅ Easy to install (use double-sided adhesive tape, not included).
✅ Store your headset elegantly on the wall or other smooth surface.
✅ Protect it from dirt, dust and clutter on a smooth base.
✅ Ideal material for printing: ABS or TPU (ABS is recommended as it is more resistant).
✅ In order for the backing to adhere well to the surface, it must be cleaned and dried where you want to stick it. After being glued, it should be left to stand for 3 minutes for a good adhesion of the product.

APPROX. DIMENSIONS:

✅ Length: 10 cm
✅ Width: 4.6 cm
✅ Height: 6.3 cm

SOPORTE GANCHO PARA AURICULARES GAMER PARA MESA DE ESCRITORIO:

✅ Facil de instalar (usar una cinta adhesiva doble faz, no incluída).
✅ Guarda tus auriculares con elegancia, en la pared u otra superficie lisa.
✅ Protéjelo de la suciedad, el polvo y el desorden sobre una base lisa.
✅ Material ideal para imprimir: ABS ó TPU (Recomendado ABS por ser más resistente).
✅ Para que el soporte quede bien adherido a la superficie, se debe de limpiar y secar donde se quiera pegar. Luego de ser pegado, se debe dejar reposar por 3 minutos para una buen pegado del producto.

MEDIDAS APROX.:

✅ Largo: 10 cm
✅ Ancho: 4.6 cm
✅ Altura: 6.3 cm

Quality:
Layer Height: 0.15mm

Perimeter:
Wall thickness: 1mm
Top layers: 4 or 6
Bottom layers: 1 or 2

Filling:
Fill density: 10%
Pattern: Grid

Material:
Printing temperature: 212ºC
Printing plate temperature: 50 or 60ºC
Enable retraction: Yes
Enable retraction in layer change: Yes

Speed:
Print speed: 100mm / s
Filling speed: 60mm / s
Wall speed: 50mm / s

Displacement:
Hairstyle mode: Everything.
Z jump in retraction: Yes
Enable Z jump in retraction: Yes

Refrigeration:
Activate cooling: No

Support: No