The file 'Gamegenic 100+ Xl Side Holder Insert – Lorcana Damage Counter Holder, Dice Holder, Lore Counter Holder 3D Printer Model' is (stl) file type, size is 141.7KB.
I bought the Gamegenic 100+ XL Side Holder boxes to store my Lorcana Starter Decks in but even with sleeved cards there was still a lot of empty space, so I made this insert to go in the box to hold damager counters, lore trackers, dice, etc. It fits inside with a 60 card sleeved deck.
You can print either the top and bottom pieces separately or use to file with both pieces to print it as a single print if your printer is large enough.
I printed the test print on an Anycubic Mega Pro, sliced in Cura with the Normal profile (0.2mm) and an infill density of 10%. No supports are needed, just print with the flat part of the box on the bed.
| Gamegenic_1--+_XL_Side_Holder_Insert._-_Both_Top_and_Bottom_of_Box.stl | 304.1KB | |
| Gamegenic_1--+_XL_Side_Holder_Insert_-_Bottom_of_Box_.stl | 1.4KB | |
| Gamegenic_1--+_XL_Side_Holder_Insert_-_Top_of_Box.stl | 303.2KB |
