GameBoy Cartridge Display 3D Printer Model
The file 'GameBoy Cartridge Display 3D Printer Model' is (stl) file type, size is 294.0KB.
The file 'GameBoy Cartridge Display 3D Printer Model' is (stl) file type, size is 294.0KB.
A minimalist display for original GameBoy cartridges. Comes in 1x1, 2x2, and 3x3, but they should be able to attach and be extendable for as many as you want. Simply print them together in a pattern you want, or glue them together after printing.
The display has a tab for the lock-notch of the cartridge, this helps snap it in more securely, and has an elevated ridge to better click the cart in, and hold it in place. This ridge is angled on the bottom, at about 72 degrees, but is small enough that it should print without any supports.
The back of the display has a support to keep the cart in, and add some structural integrity, you can use this part to adhere double-sided tape, or insert a small screw.
I opted not to include a dedicated screw hole so that the choice in size can be made by the person using it, but if there's interest for a dedicated hole, or perhaps a thicker backing to allow for a countersink, that can be done.
| 1x1_GB_Holder.stl | 114.3KB | |
| 2x2_GB_Holder.stl | 408.9KB | |
| 3x3_GB_Holder.stl | 877.8KB |
![Kyuubi [Naruto] 3D Printer Model](https://res.3axis.co/a83e87b8-840c-4311-b851-2a8a79fdd67f/images/ad87de56-bb05-4faf-b7fa-550950c2d7a1_thumb.jpg)