GameBoy Advance Catridge Case 3D Printer Model
The file 'GameBoy Advance Catridge Case 3D Printer Model' is (stl) file type, size is 15.9KB.
The file 'GameBoy Advance Catridge Case 3D Printer Model' is (stl) file type, size is 15.9KB.
This is a Remix of https://www.thingiverse.com/thing:4574803.
I added the extra top support for the cartridge as I felt that it would otherwise slide around too much for my liking. As of now, it sits loosely in the slot with a bit of wiggle room for easy removal and storage, but does not move around much at all.
To add the label, you go to http://www.thecoverproject.net and edit the image a bit. Unfortunately it is not a 1 for 1 size replica if you want a perfect cart edge, but if you don't want to edit too much, it can be done. I just used some super glue to attach them.
I was able to print off (with regular printer paper as testing material) with each side measuring 79mm x 83mm and the spine as 13mm x 83mm if you want to edit them to come out perfectly on each edge.
Also, I had trouble using CURA as for some reason some of the sides didn't print properly, but using PrusaSlicer worked perfectly.
| GBA_Case_PR.stl | 63.3KB |
