Game Pieces With Private Information 3D Printer Model
The file 'Game Pieces With Private Information 3D Printer Model' is (stl) file type, size is 85.9KB.
The file 'Game Pieces With Private Information 3D Printer Model' is (stl) file type, size is 85.9KB.
These are models I made in my free time to create game pieces where each piece has private information. There are two principle versions here depending on how much time you have:
GamePieceWithBase_v3 is a full game piece and can be completed with a bit of paint or a sticker. It takes a while to print though and can likely be improved. There is a void in the bottom which you can friction fit a US Penny into to give the piece a satisfying amount of weight.
BaseClip_v3 and PennyClip_v2 are meant to be printed out together. If you're short on time, you can print these out very quickly and glue a folded paper game piece into the BaseClip model. Then, the base clip can be fit onto the PennyClip and the PennyClip ought to be able to hold a US Penny to give it some heft. I suggest liberal application of hot glue at all steps of construction for durability.
| BaseClip_v3.stl | 23.8KB | |
| GamePieceWithBase_v3.stl | 923.9KB | |
| PennyClip_v2.stl | 55.6KB |
