Game Of Thrones Clock 3D Printer Model
The file 'Game Of Thrones Clock 3D Printer Model' is (pdf,stl) file type, size is 1.1MB.
The file 'Game Of Thrones Clock 3D Printer Model' is (pdf,stl) file type, size is 1.1MB.
I have been wanting to make a clock for a long time and bought the movement from Wish a couple of months ago. I didn’t like my original design so put the project on the back burner for a while.
I only recently started watching Game of Thrones and was inspired by this dragon logo.
Because of the limitations of my printer I wasn’t able to print the clock the size that I would have liked and found it looked a little lost on a wall. I decided to print a stand to allow it to sit on a table or shelf and think this looks much better.
I also found that I needed a space between the mechanism and the face, just to pull it back a little.
I used a wood filament for this project with an infill of 30%. This is the first time I have used this material and am quite pleased with the finished article. Of course you can use any material you like.
When assembling the face should push through the front with a little persuasion.
| Assembly_Instructions.pdf | 286.3KB | |
| bezel2.stl | 3.0MB | |
| body.stl | 684.3KB | |
| face.stl | 3.4MB | |
| glass_ring.stl | 136.6KB | |
| mech_spacer.stl | 89.7KB | |
| stand_P1.stl | 576.6KB | |
| stand_P2.stl | 500.0KB |
