Galileo Escapement Clock 3D Printer Model
The file 'Galileo Escapement Clock 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'Galileo Escapement Clock 3D Printer Model' is (stl) file type, size is 2.0MB.
Here is my take on a Galileo escapement 3D printed clock.
Inspired from that early picture.
All the gears are 3D printed, the frame is plywood. Some parts are wood.
Everything is adjustable for tunning.
It is not a very precise clock, as is, it runs a little fast.
And it does not run for very long, about half an hour at table top height.
See it running here:
https://www.youtube.com/watch?v=9TbkEIbFsKk&feature=youtu.be
| anchorHolder.stl | 38.2KB | |
| bigNut.stl | 395.8KB | |
| drum.stl | 163.7KB | |
| endNut.stl | 516.8KB | |
| escapeRatchet.stl | 37.6KB | |
| escapeWheel.stl | 120.6KB | |
| finger.stl | 45.6KB | |
| flange.stl | 56.8KB | |
| gear32_10.stl | 216.7KB | |
| gear40Minutes.stl | 193.4KB | |
| gear40Rewind.stl | 257.6KB | |
| gear60_8.stl | 497.0KB | |
| gearM2Z8.stl | 277.6KB | |
| gearZ8_10.stl | 135.3KB | |
| gearZ8_20.stl | 219.6KB | |
| gear_64_8.stl | 705.5KB | |
| hourGear.stl | 224.9KB | |
| hourHand.stl | 45.5KB | |
| minHand.stl | 66.1KB | |
| Pendul1.stl | 83.5KB | |
| rachetHolder.stl | 50.8KB | |
| ratchet.stl | 31.3KB | |
| rewindFlange.stl | 74.5KB | |
| rewindKey.stl | 349.3KB | |
| romanFace.stl | 112.8KB | |
| screw.stl | 2.0MB | |
| shaftZ8.stl | 603.8KB | |
| smallFlange.stl | 62.5KB | |
| smallNut.stl | 188.4KB | |
| spacer.stl | 63.6KB | |
| spacer1.stl | 35.6KB | |
| spacer4.stl | 34.8KB | |
| spacer6.stl | 41.7KB |
