3D Printer Models

Galaxy Tab S6 Stand Multi Angle, Slim Design 3D Printer Model

Author: @PerditionFighter

License: CC BY-NC

File formats: stl

Download type: zip

Size:913.9KB

The file 'Galaxy Tab S6 Stand Multi Angle, Slim Design 3D Printer Model' is (stl) file type, size is 913.9KB.

Description Files (4)

Summary

What is this?

This is a slim tablet holder for the Samsung Galaxy Tab S6. There are 4 different cutouts that can be used to adjust the angle of the tablet (0°, 15°, 25° and 35°). A nice feature is that the tablet can be easy and comfortable carried around by hand when the ring is grabed.

Why Edge, no Edge Version?

There are two versions available:

the "Edge" version, which has a rounded edge at the bottom. Perfect version if you use the tablet in horizontal orientation the most. Because of the edge there is a slight tendency for the tablet to fall over if the tablet is used in vertical orientation and preasure is applied at the top. Happens only if the angle is 25°and above! It's realy not bad, but could happen, so be carefull.
the "No Edge" version, which will be stable even if tablet is used in vertical orientation, but has no edge at the bottom (of course also great looking...!)

What if I use a case?

The _9,5mm and _10,5mm gap version is when the tablet is used with a case. As suggested in the comments. :)

I have a Galaxy Tab S5e, does it fit?

Nope, measurements are slightly different (the S5e is a bit less thick). But I made a Version for the S5e

Tab_S6_Stand_Edge.stl	574.4KB
Tab_S6_Stand_Edge_10.5mm_Gap.stl	1.0MB
Tab_S6_Stand_Edge_9.5mm_Gap.stl	1.0MB
Tab_S6_Stand_No_Edge.stl	513.0KB