Galaxy S7 Edge Phone Mount For MotorCycle 3D Printer Model
The file 'Galaxy S7 Edge Phone Mount For MotorCycle 3D Printer Model' is (stl) file type, size is 816.8KB.
The file 'Galaxy S7 Edge Phone Mount For MotorCycle 3D Printer Model' is (stl) file type, size is 816.8KB.
I created my own motorcycle mount for my Galaxy S7 Edge.
Note that i have a small phone case on my phone which requires a bit of more space in the holder.
Also there is space for a wireless charger but also the bottom area of the phone is kept clear so you can plugin a charger.
All bolts are M4 (Hornback PLU-nr 12122)
I used the bolt of a GoPro with the GoPro Knut to tighten the cover down as you can see in the video
Checkout the video here:
https://youtu.be/eKLQLp8lmYA
The bar diameter on this bike is 22.5 mm I used some (good) double sided tape to make sure it is tight and does not tilt during driving.
The bottom part (Frame grip lower part) is made very strong where is used POLYMAKER PC-MAX with 80% infill.
I printed the other poart in Black PET.
Note that there is a long version and a short version.
So the holder is closer to the steering
DO NOT use PLA for this print as it is not as strong and cannot handle heat and has the tandancy to start deforming
| Frame_Grip_Lower_Part.stl | 936.4KB | |
| Frame_Grip_Top_part.stl | 424.9KB | |
| Frame_Grip_Top_part_Shorter.stl | 426.4KB | |
| Holder_Bottom_Part.stl | 448.3KB | |
| Holder_Top_Cover.stl | 323.5KB | |
| Schroef_Plug.stl | 50.7KB | |
| Schroef_Plug_Tiltedfor_Bed.stl | 50.7KB |
