G920/G29 Magnetic Shifter Mount 3D Printer Model
The file 'G920/G29 Magnetic Shifter Mount 3D Printer Model' is (pdf,stl,stp) file type, size is 150.9KB.
The file 'G920/G29 Magnetic Shifter Mount 3D Printer Model' is (pdf,stl,stp) file type, size is 150.9KB.
I designed this to fit the magnets I had on hand and to fix some of the tolerancing issues I found with other similar designs out there. I have gotten to test this on my personal g920 but have not physically put this on a g29 but it should work just fine.
The Magnets i used are 10mm in diameter and 4mm in thickness. The magnets are designed to stick out of the print by approximately 2mm so that you get a nice firm clicking from them.
I use all 6 available magnet holes on mine but you can reduce the amount of magnets you use if you wish to tune back the force required to actuate your paddle shifters.
to assemble this you will need to disassemble your wheel as this is a press fit onto the back of the housing.
I will be adding more photos of the physical print and how to assemble shortly
If you want any modifications to the part or have something else you want made reach out to me via my fiverr profile https://www.fiverr.com/ethandavis149
| mag_shifter_drawing.pdf | 90.0KB | |
| mag_shifter_v3.stl | 141.4KB | |
| mag_shifter_v3.stp | 134.7KB |
![CadetYoke V2.0 [Open-Source Yoke For Flight Simulators] 3D Printer Model](https://cdn.3axis.co/assets/74/d6/01/aa/74d601aa-5153-4f25-bb8a-85d79b92292c/images/e3bb804f-b779-4e1a-b682-bbf658569414_thumb.jpg)
