Installing a slimline USB Floppy drive into a PowerMac G4 QuickSilver edition.
This requires either an internal USB port (PCI card) or running the USB cable out a PCI slot and into the external motherboard USB input (you will likely need a USB extension cable for that scenario). Disassemble the USB floppy drive cover and only use the internals.
If you have problems with layer adhesion, print the faceplate on edge so that the tabs are the strongest.
| QS-Floppy-Bezel.stl | 775.3KB | |
| USB-floppy_legs.stl | 266.0KB |
