G18c Aep Extended Mag Base. 3D Printer Model
The file 'G18c Aep Extended Mag Base. 3D Printer Model' is (stl) file type, size is 82.8KB.
The file 'G18c Aep Extended Mag Base. 3D Printer Model' is (stl) file type, size is 82.8KB.
Hey Guys.
Here is my Airsoft Glock 18c Extended Magazine Base
It fits right on the Bottom of your Gun.
Glue it into place.
Note: Make sure your Motor Height is set up correct because if you Glue the Base on u cant change it anymore.
Install Instructions:
Check the Fitment of the Base
Put some Superglue on the Base and glue it into place
Let the Glue fully cure and enjoy your new Baseplate.
Print Tips:
Use a Brim of 4-7 Lines if you have Problems withe the Print sticking to your Buildplate.
The Base can Be Printed without a Brim, but if you use a Brim make sure to remove it carefully with a Razorknive.
Print at max. 0.2 Layerheight.
Stay tuned for more Airsoft and G18 Mods.
Also if you like my Work you can leave a Tip.
I can Ship the Item already Printed for you if you are located in germany.
Greatings and Happy Printing Dex.
| Extended_Magbase_glock_v2.stl | 260.4KB |
