G1000 Pan Zoom Switch 3D Printer Model Free Download

Description Files (10)

Summary

This is a Pan/Zoom switch for the 3D printed G1000. It uses a single cheap rotary encoder(20 position works best) and 4 tactile switches to accomplish a hard to find and complex switch.

Update 29 April 2020:

Adjusted "knobshaft.stl" from 25mm to 28mm in length for better clearance.
Added circuit boards .dxf for those whose wish to make ones like I did.(optional)

Update 28 March 2020:

Updated the Housing and encoder connector to V3. Removed the teeth as they don't align with the encoders and a few various changes for better function.

Update 16 March 2020:

I have started testing and noticed that not all of the rotary encoders I have are the same. In fact I have some that have 20 positions per 360 degrees of travel and they work great with this. So I added an Encoder connector without the teeth on it for those who do not with to use the teeth. I removed the teeth all together as they were starting to cause problems in testing. So stay tuned for further development.

Disclaimer: The photos above are from the prototyping stage and the panel it is attached to is a cross section of the bezel for testing purposes. This design has also not undergone complete testing yet.

Encoder_Connector_V5.STL	193.8KB
HousingV4.STL	252.2KB
knob.STL	405.2KB
knobshaft.STL	5.0KB
PCB.DXF	161.8KB
PCB.STL	38.2KB
PinV2.STL	8.3KB
Rotary_Encoder_PanZoom_PCB.DXF	172.7KB
ShaftV2.STL	277.0KB
TactHousing.STL	72.7KB

G1000 Pan Zoom Switch 3D Printer Model

Summary

Tags

You might also like