G-Scale Super Chief Superdome 3D Printer Model
The file 'G-Scale Super Chief Superdome 3D Printer Model' is (stl) file type, size is 4.6MB.
The file 'G-Scale Super Chief Superdome 3D Printer Model' is (stl) file type, size is 4.6MB.
This is one of several "things" that I have been working on for a Super Chief style train in G-scale. (not 100% accurate, but close enough)
Update: 14th April 2022: Added variations of upper and front deck interiors
15th April. End door remixed to fit better.
18th April. Hole in base for bogie bolt needed to be just a little bit bigger. Fixed
It could probably be down-scaled (everything) to run on 32mm track, bearings would have to be considered... but I doubt you could make the mechanism work in OO
Inspiration from https://www.thingiverse.com/thing:4796985
I used the rear end for the profile, did a bit of resizing and remixing to it, also used the chassis, with modifications and fixes and a modified from the F7 located at:
https://www.thingiverse.com/thing:5331642
That bogie can be found at... https://www.thingiverse.com/thing:5333545
All other files have been re-drawn completely and an imaginary interior designed for it
I have not printed this yet, so any problems will be corrected as I print.
Further carriages can be found here:
Dining Car: https://www.thingiverse.com/thing:5334363
Observation Car: https://www.thingiverse.com/thing:5333532
Passenger Car: https://www.thingiverse.com/thing:5334371
Baggage Car: https://www.thingiverse.com/thing:5334596
RPO Coach: https://www.thingiverse.com/thing:5334602
Sleeper 10 6: https://www.thingiverse.com/thing:5334604
Duplex Sleeper: https://www.thingiverse.com/thing:5334607
Mail Car: https://www.thingiverse.com/thing:5334635
Part Dome: https://www.thingiverse.com/thing:5334796
Superdome: https://www.thingiverse.com/thing:5334797
| Dome_v2.stl | 97.0KB | |
| Dome_V3.stl | 143.1KB | |
| SC_Dome_Roof.stl | 388.2KB | |
| SC_End_door.stl | 32.6KB | |
| SC_Superdome_base.stl | 365.9KB | |
| SC_Superdome_Door_end_int.stl | 633.5KB | |
| SC_Superdome_Door_end_int_V2.stl | 1.9MB | |
| SC_Superdome_lower_int.stl | 1.5MB | |
| SC_Superdome_side_1.stl | 1.1MB | |
| SC_Superdome_side_2.stl | 972.4KB | |
| SC_Superdome_top_deck.stl | 2.2MB | |
| SC_Superdome_top_deck_V2.stl | 2.2MB | |
| SC_Superdom_non-door_end.stl | 492.0KB |
