G-Scale Super Chief Part Dome 3D Printer Model
The file 'G-Scale Super Chief Part Dome 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'G-Scale Super Chief Part Dome 3D Printer Model' is (stl) file type, size is 2.7MB.
This is one of several "things" that I have been working on for a Super Chief style train in G-scale. (not 100% accurate, but close enough)
Up date.. Aerial proved difficult to print in situ, so have added roof options without aerial, and a an aerial for each end (glue on later)
Update: 15th April. End door remixed to fit better.
18th April. Hole in base for bogie bolt needed to be just a little bit bigger. Fixed
It could probably be down-scaled (everything) to run on 32mm track, bearings would have to be considered... but I doubt you could make the mechanism work in OO
Inspiration from https://www.thingiverse.com/thing:4796985
I used the rear end for the profile, did a bit of resizing and remixing to it, also used the chassis, with modifications and fixes and a modified from the F7 located at:
https://www.thingiverse.com/thing:5331642
That bogie can be found at... https://www.thingiverse.com/thing:5333545
All other files have been re-drawn completely and an imaginary interior designed for it
I have not printed this yet, so any problems will be corrected as I print.
Further carriages can be found here:
Dining Car: https://www.thingiverse.com/thing:5334363
Observation Car: https://www.thingiverse.com/thing:5333532
Passenger Car: https://www.thingiverse.com/thing:5334371
Baggage Car: https://www.thingiverse.com/thing:5334596
RPO Coach: https://www.thingiverse.com/thing:5334602
Sleeper 10 6: https://www.thingiverse.com/thing:5334604
Duplex Sleeper: https://www.thingiverse.com/thing:5334607
Mail Car: https://www.thingiverse.com/thing:5334635
| SC_Dome_antenna_a.stl | 201.4KB | |
| SC_Dome_antenna_b.stl | 64.1KB | |
| SC_Dome_base.stl | 280.6KB | |
| SC_Dome_door_end.stl | 339.8KB | |
| SC_Dome_Lower_interior.stl | 774.7KB | |
| SC_Dome_non-door_end_int_.stl | 624.9KB | |
| SC_Dome_roof.stl | 540.9KB | |
| SC_Dome_roof_sans.stl | 241.3KB | |
| SC_Dome_Roof_V2.stl | 504.1KB | |
| SC_Dome_Roof_V2_sans.stl | 92.1KB | |
| SC_Dome_side_1.stl | 939.4KB | |
| SC_Dome_side_2.stl | 939.4KB | |
| SC_Dome_top_deck.stl | 2.1MB | |
| SC_End_door.stl | 32.6KB |
