This is a set of parts to make a G scale /1/24 scale station canopy, a bench and a station lamp.
The station canopy is based on old British station canopies, and is modular. Parts all have dovetails so that they can be printed separately and then assembled. I assembled mine and glued with acetone.
I added a plastic "slate" roof to mine, but have not painted it for the photo. Looking at the photo I think that perhaps the support pillar should have been slightly further recessed into the station.
The station lamp is designed to use 4mm brass tube and to take a small "pea" bulb to light it.
The height of the lamps is of course, determined by how long you make the tube!
There is also a more modern Octagonal lamp in the 123DX file.
The people in the photo are standard LGB people from the train sets.
The "simple station" STL is not for printing, but helps show how everything comes together
| 124_bench.123dx |
| 4mm_tube_lamp_base.stl |
| 4mm_tube_lamp_cross.stl |
| bench.stl |
| Canopy_Corner.stl |
| canopy_just_parts.123dx |
| Canopy_Large_section.stl |
| Canopy_pillar_arm.stl |
| Canopy_Pillar_with_peg.stl |
| Canopy_Short_section.stl |
| Canopy_support_section.stl |
| octo_and_square_lamps.123dx |
| simple_station.stl |
| square_lamp.stl |
