This was a project I started to get to know my Ultimaker original 3d printer
It is a fully functional locomotive inspired on a Saxon 1K.
I painted the model not to mask any scarrs, just becouse I didn't have all desired colours on stock.
Small lights can be mounted in the lanterns and there is space for a smokestack. The bill of materials is also uploaded.
Everything except for the wheels, axles and of course the motor is printed. The body and boiler were printed before I builded a hot bed, so these parts can be printed with less warp. However I'm quite pleased with the result
Some parts might still need a bit of finetuning but it was a fun project to work on.
Here's a short video (still without the piston and rods):
https://www.youtube.com/watch?v=_dJ7phcc00Q&list=UUpL-x-NZoF6dd53C2jUvMNg
UPDATE:
A new short vid with the drivegear mounted:
https://www.youtube.com/watch?v=l6b3KC1Xu6Y&feature=youtu.be
| bearing-13x6x5.stl | 108.1KB | |
| bearing-19x7x6.stl | 143.6KB | |
| Bill_Of_Materials.xlsx | 12.3KB | |
| body.stl | 3.9MB | |
| body2_cpl.stl | 7.6MB | |
| boiler.stl | 2.9MB | |
| box.stl | 2.8KB | |
| buffer1.stl | 34.8KB | |
| cabin.stl | 2.6MB | |
| chassis-connector2.stl | 989.5KB | |
| chassis-front.stl | 609.1KB | |
| chassis-side-l.stl | 279.7KB | |
| chassis-side-r.stl | 279.7KB | |
| chassis2-l.stl | 1.4MB | |
| chassis2-r.stl | 1.5MB | |
| chassis2_cpl.stl | 7.1MB | |
| coal-container.stl | 2.6KB | |
| coupler-loc.stl | 280.4KB | |
| crank1.stl | 72.2KB | |
| cylinder-r.stl | 1.1MB | |
| cylinder_l.stl | 1.1MB | |
| gear1-motor.stl | 90.3KB | |
| gear2_worm.stl | 130.0KB | |
| gear3.stl | 251.0KB | |
| interior-1.stl | 1.3MB | |
| lantaarn-1l.stl | 341.9KB | |
| lantern-1r.stl | 341.9KB | |
| lantern-glass.stl | 12.0KB | |
| loc2_cpl.stl | 14.4MB | |
| motor-n2738.stl | 370.4KB | |
| oval-thingy.stl | 93.8KB | |
| Parts.rar | 11.7MB | |
| Parts_RevA.rar | 11.7MB | |
| piston-guide-1.stl | 81.5KB | |
| piston.stl | 30.4KB | |
| rod1.stl | 50.3KB | |
| rod2.stl | 48.9KB | |
| roof.stl | 34.6KB | |
| wheel-axle-2.stl | 45.9KB | |
| wheel-loc.stl | 77.2KB | |
| worm2.stl | 1.4MB | |
| worm_and-gear.stl | 1.6MB |
