G Pro Wireless, With G305 Base Mod Giovox912 3D Printer Model
The file 'G Pro Wireless, With G305 Base Mod Giovox912 3D Printer Model' is (stl,rar) file type, size is 2.7MB.
The file 'G Pro Wireless, With G305 Base Mod Giovox912 3D Printer Model' is (stl,rar) file type, size is 2.7MB.
Note:
Some versions described and shown in the photos are temporarily unavailable for review.
This mode is truly fabulous!! I tried different mods, but none of these really gave an excellent feeling in daily use, finally with this mod it is possible to use this mouse on a daily basis. You can choose whether to print the heavier bottom with the USB port, or the lighter one without. You can use an AAA type-c battery to reduce the weight of the mouse and install a type-c port to charge it without ever having to disassemble it again. I use the original wheel, but you can print one, look for one on thingerverse if you want, for example :
https://www.thingiverse.com/thing:4892344
https://www.thingiverse.com/thing:4441561
You will be able to replace the case of your old mouse forever!!
| Battery_holder.stl | 98.3KB | |
| Body_new.stl | 2.5MB | |
| Bottom_ultralight_new.stl | 1.2MB | |
| Bottom_usb_slot_new.stl | 1.2MB | |
| HOW_TO_PRINT.rar | 660.2KB | |
| Left_button_new.stl | 295.3KB | |
| Right_button_new.stl | 246.0KB | |
| Side_button.stl | 88.4KB |
