FWW Charging Deathclaw 3D Printer Model
The file 'FWW Charging Deathclaw 3D Printer Model' is (stl) file type, size is 112.0MB.
The file 'FWW Charging Deathclaw 3D Printer Model' is (stl) file type, size is 112.0MB.
Hi wastelander !
The ferocious deathclaw is charging aggressively.
I smoothed him a lot, trying tio keep sharp edges where necessary.
It should be correctly sclaed, and fits on a 48mm base, with urban style.
I'll try adding some texturing in the skin if i find a good method.
Added a split version that could help for printing sharp areas like claws and head
== Please consider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, i will remove it.
| 48mm_urban_base.stl | 348.1KB | |
| charging_DC_assembled.stl | 33.0MB | |
| Charging_DC_body.stl | 19.8MB | |
| Charging_DC_head.stl | 7.5MB | |
| Charging_DC_Larm.stl | 2.9MB | |
| Charging_DC_Rarm.stl | 2.9MB | |
| charging_deathclaw_smoothed.stl | 61.7MB | |
| charging_deathclaw_smoothed_reduced.stl | 30.9MB |
