FuzNuz Hoof Stand 3D Printer Model
The file 'FuzNuz Hoof Stand 3D Printer Model' is (stl) file type, size is 917.8KB.
The file 'FuzNuz Hoof Stand 3D Printer Model' is (stl) file type, size is 917.8KB.
This requires a large (450 mm x 450 mm) print bed. I have not optimized the design that much yet. It works via using one of these bolts: https://www.mcmaster.com/92240A581/ installed in the front with one of these hex nuts to retain it, https://www.mcmaster.com/90473A030/. This then is tightened into the post, holding it in place via friction.
On the sides it has these magnets. Which need to be secured with M4 screws.
https://www.mcmaster.com/5819K52/ secured with https://www.mcmaster.com/92095A196/
Very much a work in progress but will have to see how it prints and works out.
| Hoof_stand.stl | 1.7MB | |
| Post.stl | 645.7KB |
![Children Game [2y+] : My Little Farm 3D Printer Model](https://res.3axis.co/f346d4b7-3b94-49ec-93db-0abd55d4af40/images/aa3fcf9a-f8a6-4f77-bb98-345e4fe9e712_thumb.jpg)
