Another model created for study. It started with the idea of ​​being a vase and evolved into that. A multi-use box with 4 compartments.
Number of pieces:
Core - 4x
Cover - 4x
Join - 4x
Nut - 4x
Lock Ring - 12x
I made 2 size options, the biggest with 128mm height and the smallest with 90mm. I also made 2 cover options, with and without support.
In fact the supported version can be printed without the slicer supports and the unsupported version has to have the slicer supports.
The supported version has a ring around the hole that needs to be removed after printing.
I made some images to show both options.
Please visit my profile to see my other models:
https://www.thingiverse.com/hmn3d/designs
Share my creations is the way I found to contribute and thank the help I've always had from the 3D printing community.
I'll try to keep the posts consistent, but if you'd like to help me out with a tip, please use the link below. Thanks!
| large_core.stl | 124.8KB | |
| large_cover.stl | 69.5KB | |
| large_cover_with_support.stl | 78.1KB | |
| large_join.stl | 139.0KB | |
| large_lock_ring.stl | 26.2KB | |
| large_nut.stl | 244.3KB | |
| small_core.stl | 161.2KB | |
| small_cover.stl | 69.1KB | |
| small_cover_with_support.stl | 78.3KB | |
| small_join.stl | 133.2KB | |
| small_lock_ring.stl | 26.2KB | |
| small_nut.stl | 362.5KB |
