It's finally caught up to you. You've finally collected what your loved ones only refer to as an "obscene" amount of tabletop gaming dice. Or maybe you've shown restraint, and have only a select few sets of dice you want to show off. Either way, you want a functional dice display system that can grow when "the impulse" strikes again, but also lets you use your precious math rocks.
This design uses three modular edge pieces which attach to a frame that can be hung on the wall using Command Strips, nails, or whatever system you can come up with. Modules can be repeated as many times as you'd like and are secured together with M4 screws and bolts. Dice are stored in 145mm lengths of 26mm/1" inner diameter, 32mm/1.25" outer diameter acrylic tube segments (I used the following off Amazon: https://a.co/d/0X4Soih).
NOTE THAT CUTTING OR SANDING ACRYLIC MAY RELEASE TOXIC GAS IF THE MATERIAL MELTS FROM FRICTION. CUT IN A WELL VENTILATED AREA OUTSIDE OF LIVING SPACES.
| DiceTube_Bracket_Bottom.stl | 25.7KB | |
| DiceTube_Bracket_Middle.stl | 45.2KB | |
| DiceTube_Bracket_Top.stl | 25.3KB | |
| DiceTube_Cap.stl | 167.9KB | |
| DiceTube_CommandBracket.stl | 536.0KB |
