Update 4/30/17:
Updated files for FuseBox 1.5 are available on GitHub at https://github.com/alexyu132/fusebox. Check the repository for the most recent changes and updates.
Update 12/22/15:
For additional rigidity, use part HBLTBS3 from Misumi. These are metal corner brackets that replace the printed corner brackets and bottom plates on the x-axis. They're pretty cheap at $0.75 each and should effectively reduce frame wobbling.
The FuseBox is a low-cost CoreXY 3D printer that uses a 1515 aluminum extrusion frame. Capable of printing at high resolutions and high speeds owing to its CoreXY kinematics, it produces quality parts that are up to 200x200x200mm in size. It's designed such that no specialized equipment (such as a laser cutter or CNC machine) besides a 3D printer is required to fabricate all the parts.
The printer can be built for under $300 without a heated bed, or a bit over that with a heated bed. By finding the cheapest parts, the cost can approach $200.
https://youtu.be/kshVDL2V_oc
https://youtu.be/qRtPtuInjQw
https://youtu.be/7nx2nsnKOrY
https://youtu.be/I3xibPxbO2s
For more information, visit the RepRap wiki page at http://reprap.org/wiki/fusebox, or the RepRap forums thread at http://forums.reprap.org/read.php?397,557542
| BottomZRodMount.stl | 40.4KB | |
| Carriage.stl | 158.7KB | |
| CornerBrace.stl | 23.7KB | |
| CornerTrussBrace.stl | 33.9KB | |
| ExtruderArm.stl | 48.6KB | |
| ExtruderBody.stl | 68.5KB | |
| ExtruderPin.stl | 9.3KB | |
| FanDuct.stl | 15.5KB | |
| FlatBracePlate.stl | 20.6KB | |
| FrontPSUMount.stl | 8.3KB | |
| FuseBox1.4_Unified.skp | 3.9MB | |
| Fusebox_1.4.stl | 3.7MB | |
| HotendClip.stl | 30.4KB | |
| LeftBedMount.stl | 15.2KB | |
| LeftIdlerCorner.stl | 72.5KB | |
| LeftXEnd.stl | 116.5KB | |
| LeftZBrace.stl | 78.3KB | |
| newcarriage.stl | 314.0KB | |
| PSUCornerBrace.stl | 24.0KB | |
| RAMPSMount.stl | 20.2KB | |
| repetier-firmware-unheated.zip | 458.3KB | |
| RightBedMount.stl | 15.2KB | |
| RightIdlerCorner.stl | 72.6KB | |
| RightXEnd.stl | 100.2KB | |
| RightZBrace.stl | 78.3KB | |
| SidePSUMount.stl | 9.4KB | |
| TestPrint.stl | 60.1KB | |
| TopZRodMount.stl | 49.6KB | |
| XYMotorMount.stl | 38.9KB | |
| YEndstopMount.stl | 26.6KB | |
| YRodMount.stl | 18.8KB | |
| ZMotorMount.stl | 54.5KB | |
| ZNutMount.stl | 59.1KB |
