Fursuit Horns And Claws 3D Printer Model
The file 'Fursuit Horns And Claws 3D Printer Model' is (stl) file type, size is 57.7MB.
The file 'Fursuit Horns And Claws 3D Printer Model' is (stl) file type, size is 57.7MB.
A selection of Fursuit horns and claws. The horns were designed for a deer and there's a few claw sizes to attach to hands and feet.
The horns are designed to use 1/4 inch tee nuts found here https://www.amazon.com/gp/product/B07VGDSRKG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
The 3 orbital holes are for short wood screws to mount into the horn with hot glue. The fursuit head should have a 1.5 inch to 1 inch 1/4-20 bolt sticking out of the top of the head so that you can thread these horns on much like a pool cue.
The horn stubs are for if you want to make a plush version of horns that can still thread on. simply carve your horns out of foam and glue the stubs to the bottom, then cover the whole thing in fabric.
There are also stubby pointed horns that were designed for a devil dog. they are not thread-on.
There are also "wing spikes" that I made to attach onto the tip of a dragons wings. Also "Wing Caps" that are meant to fit onto the end of 1/2 inch PVC or PEX water line used as spines in the wings, the caps keep the spines from being abrasive in the wing fabric.
There are also 2 sets of Fursuit teeth, one with vampire fronts and another for a canine. There are also files for individual teeth if you want to use those.
| Bottom1.stl | 4.2MB | |
| Bottom2.stl | 4.4MB | |
| Bottom3.stl | 4.6MB | |
| Bottom4.stl | 5.3MB | |
| Bottom5.stl | 6.0MB | |
| Bottom6.stl | 6.8MB | |
| BottomVampireFinal.stl | 6.8MB | |
| CanineBottomFinal.stl | 7.0MB | |
| CanineFinal.stl | 115.5KB | |
| CanineTopFinal.stl | 6.2MB | |
| claweditFinal.stl | 237.6KB | |
| clawfinal.stl | 493.2KB | |
| FingerClawFinal.stl | 127.6KB | |
| HandClaw.stl | 127.6KB | |
| HandClawCybalt.stl | 113.9KB | |
| HandClawNewFinal.stl | 113.9KB | |
| HornFinal.stl | 461.8KB | |
| HornLowerLeft.stl | 3.0MB | |
| HornLowerRight.stl | 3.0MB | |
| HornRaw1.stl | 4.7MB | |
| HornRaw2.stl | 4.7MB | |
| HornsStubLeft.stl | 575.0KB | |
| HornsStubRight.stl | 575.0KB | |
| HornUpperLeft.stl | 1.7MB | |
| HornUpperRight.stl | 1.7MB | |
| Incisor.stl | 3.2MB | |
| Molar.stl | 403.1KB | |
| NamiHorn.stl | 1.7MB | |
| TeethBridge.stl | 79.6KB | |
| ToeClaw.stl | 114.7KB | |
| ToeClaw2Raw2.stl | 231.9KB | |
| ToeClawCybalt.stl | 231.9KB | |
| ToeClawV3Final.stl | 204.8KB | |
| Top1.stl | 3.9MB | |
| Top2.stl | 4.1MB | |
| Top3.stl | 4.4MB | |
| Top4.stl | 5.2MB | |
| Top5.stl | 5.9MB | |
| TopVampireFinal.stl | 6.5MB | |
| VampireTooth.stl | 425.0KB | |
| VampireTooth2.stl | 319.8KB | |
| VampireToothFinal.stl | 319.8KB | |
| WingcapLargeFinal.stl | 47.7KB | |
| WingcapSmallFinal.stl | 47.7KB | |
| WingSpike.stl | 1.6MB |
