Fursuit Goggles 3D Printer Model
The file 'Fursuit Goggles 3D Printer Model' is (stl) file type, size is 12.0MB.
The file 'Fursuit Goggles 3D Printer Model' is (stl) file type, size is 12.0MB.
Large goggles designed to fit a fursuit or protogen. The caps thread onto the base, and there is an option for a base with an attachment block for arms that can be bolted onto different cover plates which can be articulated for a steampunk look.
There is a recessed ring in the goggle base to fit a strip of 18650 batteries. They can be controlled by a wemos D1 mini using WLED, which is what the "controller" is for. if your suit allready has 5v power you can just tap into it and use the smaller controller case, if you need separate power, the larger controller case has slots for 4 18650 batteries in a 2S configuration.
note: use one 5v 18650 right next to the digital output pin of your wemos to bump the data up to 5v for the rest of the led strip (since wemos logic is only 3.3v). ive used this method tons and it works way better than a logic level shifter.
| GoggleBaseL.stl | 1.0MB | |
| GoggleBaseLWithSideMounts.stl | 1.1MB | |
| GoggleBaseR.stl | 1.0MB | |
| GoggleBaseRWithSideMounts.stl | 1.1MB | |
| GoggleBottomBarA.stl | 1.7MB | |
| GoggleBottomBarB.stl | 1.7MB | |
| GoggleCap.stl | 3.9MB | |
| GoggleCapNuclear.stl | 3.9MB | |
| GoggleCapStar.stl | 6.4MB | |
| GoggleControllerBackNoBatt.stl | 293.3KB | |
| GoggleControllerCover.stl | 2.6MB | |
| GoggleControllerCoverBackwithBatt.stl | 499.4KB | |
| GoggleControllerCoverwithBatt.stl | 2.9MB | |
| GoggleStarPlate.stl | 465.4KB | |
| GoggleTopBarA.stl | 1.7MB | |
| GoggleTopBarB.stl | 1.7MB | |
| GoggleTopPlate.stl | 355.7KB | |
| GoggleTrefoilPlate.stl | 218.1KB |
