Funnel For Oil Changes, M37x3.0 Thread (Toyota, Lexus, Lotus, Etc.) 3D Printer Model
The file 'Funnel For Oil Changes, M37x3.0 Thread (Toyota, Lexus, Lotus, Etc.) 3D Printer Model' is (txt,stl) file type, size is 62.4KB.
The file 'Funnel For Oil Changes, M37x3.0 Thread (Toyota, Lexus, Lotus, Etc.) 3D Printer Model' is (txt,stl) file type, size is 62.4KB.
This funnel was created for doing oil changes on Toyota/Lexus/Lotus engines which use a M37x3.0 thread on the oil cap. I printed it in PLA and it is about 120.7mm tall and 122.2mm wide, just in case you need to adjust in your slicer. I used Cura and flipped the funnel so it would be large end down against the plate and I did not use any support but I did use a brim for extra stability and I used 20% infill which I found is super strong.
Hope you enjoy it!
| Info.txt | 461.0B | |
| OilFilterFunnelThread_v8.stl | 202.3KB |
