Functional Differential Gear System 3D Printer Model
The file 'Functional Differential Gear System 3D Printer Model' is (STL,zip) file type, size is 17.5MB.
The file 'Functional Differential Gear System 3D Printer Model' is (STL,zip) file type, size is 17.5MB.
This is a functional differential gear system. For those unfamiliar, a differential allows two output shafts to be spun at different speeds from a single input shaft. You will find these in most cars on the road.
For more info see http://auto.howstuffworks.com/differential1.htm
Updated: Differential2.zip file includes the SolidWorks source files and a DXF of the print.
Created with the aid of this document: http://ewp.rpi.edu/hartford/users/papers/engr/ernesto/brownm2/EP/Final%20Report/Design%20and%20Analysis%20of%20a%20Spiral%20Bevel%20Gear.pdf
| Assembly.STL | 11.5MB | |
| Casing.STL | 430.1KB | |
| Differential2.zip | 10.5MB | |
| Handle.STL | 302.0KB | |
| Input_Pinion.STL | 166.1KB | |
| Input_Pinion_No_Back_Cut.STL | 154.1KB | |
| Shaft.STL | 93.8KB | |
| Side.STL | 58.6KB | |
| Side_Gear.STL | 161.3KB | |
| Side_Gear_No_Back_Cut.STL | 153.3KB | |
| Spider.STL | 164.4KB | |
| Spider_Shaft.STL | 14.9KB | |
| Stand.STL | 197.1KB | |
| Stand3.STL | 3.9MB | |
| StandNoRibs.STL | 1.2MB | |
| Top.STL | 74.0KB |
