Fully Printable Carburetor (for Gasoline Engine) 3D Printer Model
The file 'Fully Printable Carburetor (for Gasoline Engine) 3D Printer Model' is (stl) file type, size is 8.2MB.
The file 'Fully Printable Carburetor (for Gasoline Engine) 3D Printer Model' is (stl) file type, size is 8.2MB.
This is my fully 3d-printable carburetor prototype.
It works absolutley great, as you can see in my video about it (https://youtu.be/1k920fg2RAY).
It's 12mm in diameter, which is good for a powerful 50cc two stroke or a 4 stroke up to 80cc.
Modify the jet so you're getting a 0,6mm hole for the main jet and a 0,3mm hole for the pilot jet.
Print rather slow, (40mm/s), because the parts are very small.
Print the fuel chamber quite hot (210°C) to make sure that the layers are tight to gasoline.
| carburetor.stl | 10.5MB | |
| fuel_chamber.stl | 196.0KB | |
| jet.stl | 2.1MB | |
| throttle.stl | 128.8KB | |
| topcover.stl | 7.1MB |
