Please consider supporting me on Patreon: https://www.patreon.com/DanielNoree
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer.
Now, i am not talking about a "print-several-pieces-and-then-assemble" version which there are already a ton of on the internet.
What i wanted to do was something i could print and that would actually be fully working straight out of the printer.
I like to think i came pretty close. All you need to do is to remove the internal support and your done!
Keep in mind this is a proof of concept, i just wanted to see if i could do it.
Updated 2013-10-16: Added "Printable Wrench W Longer Screw" which has a longer "screw" (3mm).
Updated 2013-08-30: I have added two new files. One with a slightly bigger gap between moving parts. This one has 0,55mm gap instead of 0,35mm. Let me know if it works out (in particular with PLA). I have also added a STEP file with no support for anyone who maight want it.
Here is a short video: https://youtu.be/Eq_JI3yctJ8
Experimantal "heavy duty" version: https://www.youmagine.com/designs/printable-wrench-reworked
Please consider supporting me on Patreon: https://www.patreon.com/DanielNoree
Home - Things - GooglePlus - Twitter - Facebook - Youtube - Instagram - Vimeo - LinkedIn
| Dual_Extrusion_Wrench__Inserts.stl | 388.0KB | |
| Dual_Extrusion_Wrench__Supports.stl | 1.0MB | |
| Printable_Wrench.A.15.stl | 8.0MB | |
| Printable_Wrench.A.15.stp | 1.3MB | |
| Printable_Wrench_No_Support.A.15.A.0.stp | 1011.9KB | |
| Printable_Wrench_W_Longer_Screw.stl | 8.1MB | |
| Printable_Wrench_W_Longer_Screw.stp | 1.1MB | |
| Printable_Wrench_w_more_gap.A.0.stl | 7.8MB |
