Fully Articulated Toa Mata 3D Printer Model
The file 'Fully Articulated Toa Mata 3D Printer Model' is (stl) file type, size is 6.7MB.
The file 'Fully Articulated Toa Mata 3D Printer Model' is (stl) file type, size is 6.7MB.
Just adding a few missing pieces to the wonderful community effort, and collating them into one thingiverse - to create the posable toa mata as I'd imagined them as a kid.
In particular:
This is only possible due to the brilliant work of
Rmiddaugh
LehvakNuva
Megawillbot
A tremendous thanks to each of them.
Of course, these tolerances are not perfect, and they are intended for my printer/resin, so slight tweaks / resizing may be needed for yours.
Let me know if you make any!
| 12_gear.stl | 287.2KB | |
| 20_gear.stl | 416.1KB | |
| 2_axle.stl | 294.8KB | |
| 3_axle.stl | 189.3KB | |
| 4_axle.stl | 157.3KB | |
| 5_axle.stl | 138.9KB | |
| 6_axle.stl | 132.3KB | |
| Akaku-thick.stl | 657.5KB | |
| axle_and_pin_connector_2.stl | 334.8KB | |
| axle_connector_with_ball_socket_4.stl | 512.7KB | |
| axle_spacer.stl | 221.7KB | |
| axle_T_connector.stl | 302.8KB | |
| ball.stl | 1.4MB | |
| bicept.stl | 771.8KB | |
| body.stl | 1.4MB | |
| eyes.stl | 269.2KB | |
| Hau-thick.stl | 1.8MB | |
| head.stl | 619.8KB | |
| heel_002.stl | 869.7KB | |
| Kakama-thick.stl | 459.8KB | |
| Kaukau-thick.stl | 91.7KB | |
| Lower_Leg.stl | 1.0MB | |
| Miru-thick.stl | 1.1MB | |
| Pakari-thick.stl | 391.5KB | |
| soft-finger.stl | 20.2KB | |
| soft-hand.stl | 305.6KB | |
| soft-thumb.stl | 24.2KB | |
| Technic_pin_without_friction_with_axle.stl | 145.4KB | |
| Technic_pin_with_friction.stl | 881.3KB | |
| toes_002.stl | 478.8KB | |
| Upper_Leg_V2.stl | 777.3KB | |
| utility-forearm.stl | 1.2MB | |
| weapon-forarm.stl | 791.5KB | |
| weapon_arm.stl | 939.0KB |
