I made these sights for my airsoft gun. The rear sight is adjustable for windage using a screwdriver, and the front post can be adjusted for elevation using a thumbscrew for quick and easy adjustments. They can be mounted on 21mm picatinny rails.
NOW EVEN WITH A REAL CLAMPING FEATURE! :D
And also with the option for a more standard, V-shaped, rear sight!
If you have any problems putting them together, leave a comment with your questions, and I will happily answer them.
What you will need in additional hardware:
3 M4 hex nut
1 M3 hex nut
| Adjustable_front_sight_-_M3_cylinderhead_screw.stl | 25.3KB | |
| Adjustable_front_sight_-_M3_nut.stl | 12.6KB | |
| Adjustable_front_sight_-_M3_screw_anti-rotation_stud.stl | 12.4KB | |
| Adjustable_front_sight_-_Thumbscrew.stl | 47.0KB | |
| Adjustable_front_sight_Main-Body_v2.stl | 150.9KB | |
| Adjustable_front_sight_Picatinny-Clamp.stl | 47.5KB | |
| Adjustable_rear_sight_-_Aperture.stl | 45.8KB | |
| Adjustable_rear_sight_-_M4_flathead_screw.stl | 36.3KB | |
| Adjustable_rear_sight_-_M4_nut.stl | 12.6KB | |
| Adjustable_rear_sight_-_Screw_cover_aka._movement_prevention.stl | 13.0KB | |
| Adjustable_rear_sight_Main-Body_v2.stl | 690.7KB | |
| Adjustable_rear_sight_Option-2.stl | 74.7KB | |
| Adjustable_rear_sight_Picatinny-Clamp.stl | 35.0KB |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
