Video can be found here: https://youtu.be/6hf6BWSmV88

STL and Editable Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/fully-3d-printable-turntable-files

I created a new and improved version of this turntable. The new version uses an Arduino Uno, stepper motor, 1602 LCD screen and a 9g servo motor. The turntable is now able to automatically take photos 360 degrees around which can be turned into a 3D-model using photogrammetry software. You can check it out here: https://www.thingiverse.com/thing:3958326

A turntable wich you can fully 3D-print, no extra parts needed!

It can be used to make beautiful cinematic shots of objects but it can also be used as a rig to make photos for photogrammetry software so you can 3D-scan objects.

The large black 'slide bearing' is printed in one peace and is free to move the moment it comes from the printbed. The print in place of moving objects adds to the simplicity of the build. The turntable is designed to be snap fitted without the need for glue, but depending on your printer, some glue might be a good idea to keep parts at their place.

Once the turntable is fully assembled, it might be hard to rotate it. I used some fine machine oil to lubricate all the parts and just turned it a lot so some wear and tear could accur wich helps with the smoothness. Once lubricated it turns very smooth. (of course not as smooth as if you were to use a bearing but pretty smooth for something wich is completely 3D-printed).

I added a white platform template to the files (pdf) wich can be printed and cut out with cissors. the diameter of the circle is 10 mm wider than the platform.

Video can be found here: https://youtu.be/6hf6BWSmV88

More info can be found here: https://hackaday.io/project/166323-fully-3d-printable-turntable

Tools used:

PLA filament: https://www.banggood.com/Creality-3D-White-or-Black-or-Yellow-or-Blue-or-Red-1KG-1_75mm-PLA-Filament-For-3D-Printer-p-1290153.html?p=E01411629100201406T1&custlinkid=926158

Recommended 3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427

Paypal: https://paypal.me/BrockenBrian

Feel free to take a look at my other designs:

3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065

Have a nice day!