This is fully 3d printable Land Rover Defender 2008 body. I don t make any manual, but I think you easily find a way how build this car. You need a lot of glue :D Everything fits well.
It's designed in SketchUp so some stl. files can be damaget little bit (I using Cura 14.07 and Cura 2.5.0. Some files have problem in newest Cura and some in oldest Cura). If you find some issue with file, let me know, I try to fix that. The V8 engine model, chassis and other things for this car you can find in my profile. Is not entirely accurate because the bueprint, what I use, was in bad quality.
Other scales:
1/18 - scale it to 79% (Unconfirmed. Only calculated.)
1/10 - scale it to 142% (Unconfirmed. Only calculated.)
| doors.stl | 148.4KB | |
| frond_extendet_fender.stl | 27.2KB | |
| front_bumper.stl | 55.1KB | |
| front_cabin_part.stl | 229.3KB | |
| front_fender.stl | 198.0KB | |
| front_fender_v2.stl | 198.0KB | |
| front_grill.stl | 26.1KB | |
| front_lightbar.stl | 200.2KB | |
| front_lights.stl | 261.4KB | |
| front_window.stl | 91.4KB | |
| grill.stl | 108.2KB | |
| hood.stl | 101.5KB | |
| left_tire_fender.stl | 73.8KB | |
| light_defend.stl | 81.7KB | |
| light_grill.stl | 146.9KB | |
| rearside_roof.stl | 418.4KB | |
| rear_bumper.stl | 176.1KB | |
| rear_cabin_part.stl | 386.6KB | |
| rear_doors.stl | 145.7KB | |
| rear_door_window.stl | 68.6KB | |
| rear_extendet_fender.stl | 24.7KB | |
| rear_light_holder.stl | 48.1KB | |
| rear_roof_skirt.stl | 26.9KB | |
| rear_side_window.stl | 103.4KB | |
| rear_window.stl | 38.2KB | |
| roof.stl | 53.1KB | |
| roof_cut1.stl | 402.3KB | |
| roof_cut2.stl | 23.2KB | |
| side_cabin_part.stl | 78.7KB | |
| side_cabin_part2.stl | 55.3KB | |
| side_fenders.stl | 10.8KB | |
| side_roof_skirt.stl | 3.3KB | |
| side_skirt.stl | 10.6KB | |
| tire_fender.stl | 51.5KB |
