Fully 3d Printable Candy Dispenser 3D Printer Model
The file 'Fully 3d Printable Candy Dispenser 3D Printer Model' is (stl,step) file type, size is 2.9MB.
The file 'Fully 3d Printable Candy Dispenser 3D Printer Model' is (stl,step) file type, size is 2.9MB.
For more info watch: https://youtu.be/yYIzFSXBvPQ
It'll work with coins that are 23mm in diameter or smaller.
All the parts where designed while keeping the limitations of 3d printing in mind. So if you stick to the correct printing orientation, as shown in the picture above, you won't need any supports except for the hopper. Print the turn Handle at 100% infill for increased strength because this part has to withstand the biggest force when the machine is being used.
The only thing you need for the assembly are a couple of M3 screws and M3 threaded inserts. I used these ones.
If you have watched the video and still have trouble with figuring out how everything goes together, I suggest you take a look at the CAD model. It is available in the downloadable files. Also I have modeled all the threaded Inserts in the CAD model, so if you are not sure where they go it's easy to figure out from that.
| Backplate.stl | 229.8KB | |
| Case.stl | 503.9KB | |
| Coin_Cover_Plate.stl | 57.5KB | |
| Coin_Disk.stl | 63.1KB | |
| Coin_Lock.stl | 32.7KB | |
| Cover_Plate.stl | 187.3KB | |
| Dispenser_Gear.stl | 330.4KB | |
| Gumball_machine_v19.step | 9.4MB | |
| Hopper.stl | 973.0KB | |
| Hopper_Cover_Plate16.stl | 115.5KB | |
| Hopper_Plate.stl | 420.8KB | |
| Mechanism_Cover_Plate.stl | 73.7KB | |
| Pawl.stl | 37.8KB | |
| Pinion_Gear.stl | 206.1KB | |
| Ratchet_Gear.stl | 27.0KB | |
| Size_Regulator.stl | 121.2KB | |
| Turn_Handle.stl | 476.2KB | |
| Washer.stl | 56.9KB |
