Fully 3D Printable 1/18 Rc Car Chassis That Doesn’t Need Bearings! 3D Printer Model
The file 'Fully 3D Printable 1/18 Rc Car Chassis That Doesn’t Need Bearings! 3D Printer Model' is (stl) file type, size is 310.5KB.
The file 'Fully 3D Printable 1/18 Rc Car Chassis That Doesn’t Need Bearings! 3D Printer Model' is (stl) file type, size is 310.5KB.
UPDATE available here: https://www.thingiverse.com/thing:5352645
Materials and parts needed M3x6mm: 9
M3x8mm: 6
M3x10mm: 4
M3x12mm: 14
M3 Washers: 14
M3 NUTS: 4
Motor type : Eflite 3900Kv EFLH1516 or other Servo type : HITEC HS-55 or other -PLA Filament
-TPU Filament
-SILICONE GREASE or SILICONE SPRAY
| Axles.stl | 39.9KB | |
| Bumper.stl | 44.6KB | |
| Control_arm.stl | 57.4KB | |
| frame.stl | 80.1KB | |
| Hub.stl | 13.6KB | |
| Low_front_shock_absorber.stl | 49.1KB | |
| Main_Gear.stl | 83.7KB | |
| Motor_mount_A.stl | 91.2KB | |
| Motor_mount_B.stl | 52.7KB | |
| Pinion_gear.stl | 22.6KB | |
| Rear_shock_absorber.stl | 39.3KB | |
| Rim.stl | 78.6KB | |
| Rim_no_support_needed.stl | 95.8KB | |
| Servo_mount.stl | 54.0KB | |
| Steering_rod.stl | 43.8KB | |
| Tire.stl | 158.7KB | |
| Upper_left_front_shock_absorber.stl | 39.1KB | |
| Upper_right_front_shock_absorber.stl | 39.0KB |
