Cradle for the Full Graphic Smart Controller case at http://www.thingiverse.com/thing:213852
All the mounts I could find were for permanently mounting the controller case to the frame but I wanted to be able to easily remove the controller. With this solution the cradle is fastened to the frame but you can lift the controller out of the cradle when needed.
This was designed for the Prusa i3 Rework from Replikeo but it will probably work with similar printers that have a 3mm frame thickness as the two pieces of the cradle just clamp over the top of the frame.
Sliced with Slic3r. Layer height 0.2mm, 30% honeycomb infill and 3mm brim. Left bracket should be printed with support material ON.
Use two M3 nuts and bolts to fasten pieces to top of frame. The circular cutout in the right piece is designed to fit the knob included with the case linked above.
| lcd_smart_controller_cradle_left.stl | 11.8KB | |
| lcd_smart_controller_cradle_right.stl | 14.9KB |
