I wanted to build an fpv pod using parts I had on hand, this pod uses a micro ccd camera (http://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html).
It should be able to fit a variety of smaller VTX transmitters, I used this VTX (http://www.banggood.com/Eachine-TS5840-Upgraded-40CH-5_8G-200mW-Wireless-AV-Transmitter-TX-for-FPV-Multicopter-p-1033810.html). I drilled the whole I ran my RX antenna through.
Big thanks to TheMultirotorShop for the frame.
| POD_FPV.stl | 249.8KB |
