(full Collection) Ossum Jeep Parts And Accessories 3D Printer Model Free Download

Description Files (32)

Summary

I'm still test fitting and editing these files, but I figured as I'm working on them I'll keep updating and revising the changes publicly as I've already gathered some interest in these parts.

I'm always open to suggestions, tweaks, modifications, and changes. feel free to provide feedback!

Some of these parts are edited off the existing Ossum jeep parts, but many are completely unique.

Check back often as I update, edit, fix, and add new files!

As with the rest of the jeep I STRONGLY advise printing in PETG. I know several of these parts will not last long in PLA.

use the same size screws as the rest of the kit, but you'll need to add mounting holes in the original jeep body for several parts,

Once Completed I'll be re-releasing the normal jeep body parts with all the holes already in them for screws (and other various changes I've made along the way!)

LOG:
5/3/17 - Currently I have released the un-printed or tested:

Rear bumper with added loops based on google images for reference
modern style Offroad Rollcage. [Print with supports!]
2 styles of Gas can holders to match Ossum's Gas can design
2 styles of lights that get mounted on the front fender
(there are a few variations as seen online, I'm tweaking this to fit an LED inside)
Offset leaf-springs (x4)
Offset leaf brackets
(brackets and springs were designed so the brackets are mounted closer to center but leaves reach back out to same mounting location. I haven't tested these yet!)
Steering wheel with mount
(I've modified the dash with a small cutout for the steering wheel, will release thoes files soon!)
front fender mounts without middle
(I used the servo on axle and wanted more room in the engine area)
Crate for battery as modified from another design

5/4/17:

fixed fender lights so it should be printable (user pointed out thin wall caused a hole)
Adjusted both styles of fender lights to be easily printed and mount an LED inside
Fixed Jerry can holders (broke in Cura, slot wasn't centered)
Added a untested alternative hitch (this is an EARLY design and likely would break if you towed the trailer with it!)
Added a rear antenna mount based off design found. (May edit this further but currently you can drill this out to stick a functional antenna through if desired, or add a decorative one!)

5/5/17

Added a wider Crate for some 34-36mm wide battery packs.
Added Hitch front bumper (uses same loop as trailer) [Print with supports!]
REPLACED the Roll cage with a revision that will print flat without supports!
REPLACED Steering Wheel with version that includes mounting hole on the bottom to go through tub, holding it in place better.
-Added a V2 hitch that's much thicker but looks goofy to me.

5/15/17

Added front fenders with patch to fill hole near frame.

5/18/17

Added Variation of Jerry can holder which integrates into the rear Tailgate. should be stronger and print/mount easier to jeep this way.
Added Left and right halves for the Jeep tub for narrow printer, this includes some extra holes for the additional things I've been making. (steering wheel mount, holes for hidden hinge design)

5/22/17

Added a muffler on passenger side.

6/7/17
Sorry for the delay's Life's gotten complicated and printer's haven't be able to test MOST of this release! Feedback and sharing your makes is a HUGE help here guys!

Added the Hidden hinge hood with window rest mounts as well.
Added the standalone hinge to glue to the stock hood as alternative
Added Dashboard with cutout for steering wheel, and mount for hidden hinge
Added both the FULL and LEFT/RIGHT versions of Ossum's jeep center tub, for mounting hole for the steering wheel, along with two cutout slits for the hidden hinge.

6/19/17

FIXED fender light, the shroud was not correctly attached to the light portion causing some issues with slicers and prints!
-added a generic seat with built in covers off ossum's design
-added a 2 piece slightly thicker version of ossum's seat, broken into 2 parts for easier printing.

Things not yet released include:

modified seats
winch plate for rc which, (and alternative decorative winch)
Modified brackets for mounting replica soft cover
scale shovel and axe mount for driver side with mounts
Front and rear mounting locations for spare tire
Foe Radiator
Other scale mods I can find on WWII era jeeps and suggestions!

Antenna_mount_Untested.stl	28.4KB
Crate.stl	29.8KB
Crate_wide.stl	29.9KB
Crate_wideTall.stl	40.6KB
Dashboard_hidden_hinge_mount_and_steering_cutout.stl	261.2KB
Fender_Mounts.stl	40.9KB
generic_seat.stl	1.2MB
Hidden_Hinge_standalone.stl	538.4KB
Hitch_Bumper.stl	291.7KB
Hitch_untested.stl	239.9KB
Hitch_V2.stl	217.2KB
Hood_with_Hidden_hinge.stl	8.7MB
Jerry_can_with_lip.stl	165.9KB
Jerry_can_with_no_lip.stl	163.7KB
Left_Fender.stl	36.5KB
Light_Flat_Covered.stl	877.3KB
Light_Guard.stl	50.0KB
Light_round_cover.stl	862.6KB
Muffler.stl	90.9KB
Offset_Leafs.stl	462.2KB
Offset_Leaf_Brackets.stl	249.4KB
Rear_bumper.stl	85.1KB
Right_Fender.stl	36.4KB
RollCage_V2_fixed.stl	1.0MB
seat_2_piece.stl	916.0KB
Steering_Wheel_V2.stl	208.0KB
Tailgate_with_CanHolder.stl	168.0KB
Tub_LEFTSIDE_with_hidden_hinge_cutout_and_steering_mount.stl	189.0KB
Tub_left_side.stl	189.6KB
Tub_RIGHTSIDE_with_hidden_hinge_cutout_and_steering_mount.stl	242.8KB
Tub_right_side.stl	242.9KB
Tub_with_hidden_hinge_cutout_and_steering_mount.stl	235.9KB

(full Collection) Ossum Jeep Parts And Accessories 3D Printer Model

Summary

You might also like