Full 3D Print Telescope 3D Printer Model
The file 'Full 3D Print Telescope 3D Printer Model' is (stl) file type, size is 4.2MB.
The file 'Full 3D Print Telescope 3D Printer Model' is (stl) file type, size is 4.2MB.
This is a fully functional 3D printed telescope. The only parts not printed are: the main lens, the eyepieces and a few screws and nuts to assemble the various components. This telescope was designed for lunar and planetary observation.
A 93 mm achromatic lens was chosen, which offers a good yield for the cost.
This lens have focus at 80 cm, so all piece that compose the telescope are necessary.
The entire telescope can be reproduced with about $ 10 of filament, $ 38 of primary lens and a few dollars for the screws. In the "materials need" section you will find the purchase instructions.
Telescope is composed by 10 different pieces:
1) Focuser
2) Tube n. 1
3) Tube n. 2
4) Tube n. 3
5) Lens Block
6) Traveler
7) Handler - Knob, need 2x - Can also print 7.3 (bigger Knob for precise focus
8) Rod - need 2x
9) Gear
10) Coperchio
In add to simple telescope there is 4 usefull accessory:
| 10_-_coperchio.stl | 31.9KB | |
| 1_-_Focuser.stl | 93.5KB | |
| 2_-_Tube_n.1.stl | 79.8KB | |
| 3_-_Tube_n.2.stl | 80.2KB | |
| 4_-_Tube_n.3.stl | 80.0KB | |
| 5_-_Lens_block.stl | 43.2KB | |
| 6_-_Traveler.stl | 88.4KB | |
| 7.1_-_manopola_grande_v3.stl | 6.7MB | |
| 7_-_Handler.stl | 3.9MB | |
| 8_-_Rod_2x.stl | 6.6KB | |
| 9_-_Gear.stl | 16.5KB | |
| Adapter_2_inc_to_1.25_inc.stl | 28.6KB | |
| dovetail_bar.stl | 4.2KB | |
| Screw_handler.stl | 1.8MB | |
| Telescope_plug.stl | 31.9KB |
